1. Avoid eating, drinking, alcohol, smoking, exercsing and bathing for 30
minutes before takinga measurement. Rest for at least 15 minutes before
taking the measurement.
2. Stress raises blood pressure. Avoid taking measurements during stressful
times.
3. The cuff can be applied to your left or right wrist.
4. Measurements should be taken in a quiet place.
5.Position the unit at heart level throughout the measurement.
6. Remain still and do not talk during the measurement.
7. Keep a record of your blood pressure and pulse readings for your
physician. A single measurement does not provide an accurate indication
of your trueblood pressure. You need to take and record several readings
over a period of time. Try to measureyour blood pressure at the same time
each day for consistency.
8. Wait 30~60 seconds between measurements.
The wait time allows the arteries to return to the condition prior to taking the
blood pressure mesurement.You may need to increase the wait time
depending on you individual physiological characteristics.
5
Battery Installation / Replacement
Use four identical 1.5V alkaline batteries type AA LR6.
Replace all of the batteries if the symbol of low battery
appears on the display.
Never leave any low battery in the battery compartment
since they may leak and cause damage to the unit.
Caution!
The battery cover will be
closed tight when you hear
a clicking sound.
3
Replace the battery cover.
2
Remove the battery
cover from the battery
compartment.
1
How to Install Battery
Install 4 “AA” size batteries
so the + (positive) and - (negative)
polarities match the polarities
of the battery compartment
as indicated.
To Next Page
Loading...