15
Statement
The intended use: The unit is intended to be used by adults at home or
medical centre to measure blood pressure and pulse rate from the upper
arm.
The unit satisfies the requirements of IEC60601-1 Medical electrical
equipment,EN1060-1:Non-invasive sphygmomanometer,EN1060-3:
Non-invasive sphygmomanometer
The unit has passed the EMC Test.
Blood pressure measurements determined with this device are equivalent
to those obtained by a trained observer using the cuff/stethoscope
auscultatory method,
within the limits prescribed by the American National Standard, Manual,
electronic, or automated sphygmomanometers.
The risk of patient and user can be lowered to acceptable level.
Substitution of a cuff different from that supplied might result in
measurement error.
Specifications are subject to change without notice due to improvements in
performance.
Federal law restricts this device to sale by or on the order of a physician.
14
Pressure
Pulse
Pressure
Pulse
Pressure
Pulse
Symbol
Measurement
Range
Accuracy
LCD
Indication
Operating
Environment
Transport and
Storage
Environment
Model No.
Display
Measurement Localization
Measuring Principle
Cuff
Memory Function
Inflation
Power Source
Rapid Air Release
Automatic Power-Off
Main Unit Weight
Deflation
Accessorial Components
0 to 299 mmHg (0 ~ 39.9 kPa)
40 to 199 Pulses/min
3 Digits Display of mmHg or kPa
3 mmHg (0.4 kPa)
5% of reading
3 Digits Display
Memory/Heartbeat/Low Battery/IHB, etc.
BP101A
LCD Digital Display
Upper Arm
Oscillometric Method
Memory 60 Sets of Measurement Values
Automatic by Internal Pump
4 AA Alkaline Batteries; D.C. 6V
Automatic by Air Valve
In 2 Minutes
Automatic by Air Valve
Soft Arm Cuff
Approx. 280g (Batteries not included)
Cuff, Instruction Manual
Temperature
Humidity
Temperature
Humidity
Barometric Pressure
10 ~ 40 C (50 ~ 104 F)
15 ~ 90%RH (Noncondensing)
-20 ~ 60 C (-4 ~ 140 F)
10 ~ 95%RH (Noncondensing)
105 ~ 80 kPa
Specifications
To Next Page
Loading...
