Rectal Use:
If rectal temperature readings am recommended by your doctor, you may use a probe covet Insert the
temperature probe into a probe cover. Lubricate the shield with a suitable personal lubricant. Insert
the probe tip no more than Ph inch into rectum. STOP if you meet any resistance. The sensing unit is
on the very tip of the probe and there is no reason to insert the Op deep into the rectum. Do NOT
insert the probe past the metal tip. In general, the rectal temperatures are approximately 1.0— 2.0° F
(0.5° -1.0° higher than oral temperatures.
Underarm Use:
Wipe armpit with a dry towel. Place probe in armpit and keep arm pressed firmly against the body. In
general, underarm temperatures are approximately 1.0— 2.0° F (0.5° -1.0° C) lower than oral
temperatures.
CLEANING & STORING
Clean the probe before and after use by washing with soap and warm water or by disinfecting with
rubbing alcohol (70% isopropyl alcohol). Wipe dry with soft cloth. DO NOT BOIL OR CLEAN IN
DISHWASHER. This will cause the thermometer to no longer -function and will void the warranty. Do
not wash the unit with any thinner or chemical solvent.
Do not store the device in direct sunlight or at high temperatures. If the thermometer has been stored
in cold conditions, allow it to warm to room temperature before attempting a measurement.
Performance of the device may be degraded if device is operated or stored outside of the stated
temperature ranges.
CHANGING FROM FAHRENHEIT TO CELSIUS & VICE-VERSA
Launch the Kinsa app. Click on the °Menu” icon and select “Settings” icon. An icon will be displayed to
indicate which mode the thermometer is in. Touch the icon to switch modes.
FEATURE
To Next Page
Loading...
