CK25/30/351-10
(1) 3-point hitch lowering speed knob
(A) “FAST” (C)“LOCK”
(B) “SLOW”
USING 3-POINT HITCH
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch
usage.
2. When using a 3-point hitch mounted
implement, be sure to install the
proper counterbalance weight on the
front of the tractor.
3. When transporting on the road, set
the implement lowering control in the
"LOCK" position to hold the imple-
ment in the raised position.
(1) PTO Shaft Cover
(2) PTO Shaft Cap
OPERATING THE PTO
1. Make sure the tractor is completely
stopped, gears are in neutral and all
moving components have com-
pletely stopped before connecting,
disconnecting, adjusting, cleaning or
servicing any PTO driven equipment.
2. Keep the PTO shaft cover in place at
all times. Replace the PTO shaft cap
when the shaft is not in use.
3. Before installing or using PTO driven
equipment, read the manufacturer's
manual and review the safety labels
704O122C704O121C
USA, AU
EU
704O123C
attached to the equipment.
4. When operating stationary PTO driven
equipment, always apply the tractor
parking brake and place chocks be-
hind and in front of the rear wheels.
Stay clear of all rotating parts.
5. Do not attach a PTO driven imple-
ment if the implement’s safety shields
are damaged or not in place. Rotat-
ing shafts are an entanglement
hazard.
To Next Page
Loading...
