Kioti CK30 - BALLAST

8-4 CK25/30/35
Weight should be added to the rear
wheels only if it is needed to improve
traction or stability. The amount of
weight should directly correspond to the
job at hand and should be removed
when not needed.
The weight should be added to the trac-
tor in the form of liquid ballast, rear
wheel weights or both.
REAR WHEEL WEIGHTS
The rear wheel weights can be attached
to the rear wheel. See your implement
owner's manual for the proper amount
of weight or consult your local KIOTI
dealer.
FRONT END WEIGHTS
Front end weights can be attached to
the front of the tractors frame. You
should consult your implement owner's
manual for the required amount of
weight or contact your local KIOTI
dealer for a recommendation.
REAR BALLAST
BALLAST (OPTION)
FRONT BALLAST
(1) Rear Wheel Weights
(2) Front End Weights
704O803C
To avoid personal injury:
zz
zz
z Additional ballast will be
needed for transporting heavy
implements. When the imple-
ment is raised, drive slowly over
rough ground, regardless of
how much ballast is used.
zz
zz
z Do not fill the front wheel with
liquid to maintain steering
control.
!!
!!
!
CAUTION
zz
zz
z Never overload the tires.
zz
zz
z Do not add more weight than is
necessary, or is indicated in
chart.
IMPORTANT
zz
zz
z Do not overload tires.
zz
zz
z Add no more weight than indi-
cated in chart.
IMPORTANT
Maximum weight
17 kg X 5 Pieces
(187 lbs.)
Maximum weight
per wheel
20 kg X 2 Pieces
(88.2 lbs.)