10-12 CK25/30/35
(1) Grease Fitting (Top Link)
EVERY 50 HOURS
LUBRICATING GREASE FITTINGS
You should apply a small amount of multi-purpose grease to the following points every 50 hours or as needed.
If your tractor is operated in extremely wet, muddy, or dusty conditions you should lubricate the fittings more often.
(1) Grease Fitting (Front bracket axle pivot)
(2)
Grease Fitting (Power steering cylinder)(RH,LH)
(1) Grease Fitting (Brake Lever RH, LH)
(1)
Grease Fitting (Power steering cylinder) (RH, LH)
(1) Top Link Holder (2) Hydraulic Cylinder
(3) Lift Rod Support
(1) Grease fitting (Rear bracket axle pivot)
704OA20C
704OA23C
704OA21C
704OA24C
704OA22C
704OA25C
To Next Page
Loading...
