- 6 -
CK3510(H)/4010(H)
TC2SZ14A
11. Insert the accelerator connecting arm (7) to
the pedal hinge shaft section and install the
snap ring (9).
TC2SZ15A
12. Insert the spacer (21) to the top pin section
of the connecting lever 1 and install the
snap pin (16).
TC2SZ16A
13. Insert the connecting rod (19) into the
accelerator connecting arm hole and fix it
with the plain washer (22) and snap pin (33).
TC2SZ17A
14. Fit the differential rod spring (20) to the
connecting rod hole to install it to the pedal
hinge bracket hook.
TC2SZ18A
TC2SZ19A
15. Install the microswitch (2) to the lever
mounting bracket with bolt & nut. Connect
the body wiring connector (white) (A) under
the steering support to the connector of the
pedal connecting wiring assembly (1). Then,
connect it to the microswitch connector (B).
To Next Page
Loading...
