- 33 -
Remote Control Valve Lever
Move the lever up or down and hold. This will raise or
lower the implement. Lever will return to neutral when
released.
IMPORTANT:
• Do not hold the lever in the "Pull" or "push" position
once the remote cylinder has reached the end of
the stroke, as this will cause oil to flow through the
relief valve. Forcing oil through the relief valve for
extended periods will overheat the oil.
• When using the tractor hydraulic system to power
front loader, do not operate boom and bucket cyl-
inders simultaneously.
Disconnecting
1. Lower the implement first to the ground to release
hydraulic pressure in the hoses.
2. Clean the couplers.
3. Relieve pressure by moving hydraulic control le-
vers with engine shut off. Pull the hose straight from
the hydraulic coupler to release it.
4. Clean oil and dust from the coupler, then replace
the dust plugs.
NOTE :
• Your local KIOTI Dealer can supply parts to adapt
couplers to hydraulic hoses.
623O425A
1, 2 Remote control valve lever
Pressure
Returning
Lever 1
Lever 2
Push
In
Out
Push
In
Out
Pull
Out
In
Pull
Out
In
Port A B
Port C D
Coupler Size
PT 1/2
A
B
C
D
Port
Port
To Next Page
Loading...
