K110sm1e1.doc
1-3
1. 2 Specifications
Model KIP 600
Scanning method Sheet through type
Reading sensors Contact Image Sensor
(for A4 size x 5 pieces in staggered arrangement)
Light source LED (R/G/B)
Setting Face up
Starting point of scan Center
Original width 257-914 mm (11” – 36” )
Original thickness 0.05 -1.6mm
Margin 3.5 to 4.5mm from leading / trailing edge
Resolution 600dpi
Color mode Monochrome : Binary
Grayscale : 4 bit / 8 bit
Color : 24 bit
Scanning speed
(on 600 dpi)
Monochrome : 65mm/s
Grayscale : 65mm/s
Color : 22mm/s
Resolution 600dpi
Interface USB 2.0 (Maximum: 5VDC)
Input power Voltage: 100-240VAC
Current: 1A
Frequency: 50/60Hz
Power consumption 60W maximum
Environmental conditions 10-32 degrees centigrade, 20-85%RH (Non condensing)
Acoustic noise 60 db or less (during 65mm/s scan operation)
Outer dimension 1,097mm (Width) x 408mm (Depth) x 170mm (Height)
Weight Approximately 24kg ( 53 lbs)
NOTE
These specifications are subject to change without notice.
NOTE
The KIP 600 accepts the inlet voltages of 100 to 240VAC
without additional voltage transform.
To Next Page
Loading...
