3. If the oil level is low, add to the edge of the oil filler port.
■ Replace the engine oil
1. Disassemble the oil dipstick and oil drain bolt, drain out dirty oil.
2. Fix the oil drain bolt tightly.
3. Refill in clean oil. (oil capacity is 0.4L)
※ Recommended oil: SAE10W-30 or SAE30, API Service Classification SE, SF or SG.
4. Check the oil level; fill to the upper limitation level if necessary.
5. Tighten the oil dipstick.
■ Please dispose of the used motor oil in a manner that is compatible with the environment. We
suggest you take used oil in a sealed container to your local recycling center or service station for
reclamation. Do not throw it in the trash; pour it on the ground, or down a drain.
■ Drain the used oil while the engine is warm. Warm oil drains quickly and completely. Be attention that
the temperature should not be too high to avoid scalding.
21
To Next Page
Loading...
Need help?
General
