DC receptacle
Start switch
Chock knob
Fuel valve lever
Grounding terminal
AC receptacle
Ignition
2.2 Control panel (See Fig.2)
Fig.2 Control panel
-4-
-5-
SMART throttle
OFF:
Note:Smart throttle system does not operate. Engine speed is kept over rated
speed.
Engine speed is kept at idle automatically when the electrical appliance is discon-
nected and it returns to the proper speed to power of the electrical load when elec-
trical appliance is connected. This position is recommended to minimize the fuel
consumption while in operation.
Smart throttle system does not operate effectively if the
electrical appliance requires the momentary electric
power.
When high electrical loads are connected simultaneously
turn the smart throttle switch to the OFF position to re-
duce voltage changes.
In DC operation, turn the smart throttle switch to the OFF
position.
NOTE
To Next Page
Loading...
