EasyManuals Logo

Kipor Sinemaster IG6000 User Manual

Kipor Sinemaster IG6000
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
3. PRE-OPERATION CHECK
Be sure to check the generator on a level surface with the engine stopped.
3.1 Engine Oil
WARNING
Using non detergent or 2-stroke engine oil could shorten the engine's service life.
Use a high-detergent, premium quality four cycle engine oil, certified to meet or exceed U.S.
Automobile manufacturer's requirements for API Service Classification SG/SF.
Select the appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
Ambient Temperature
Open the service door. Remove the oil filler cap and wipe the dipstick with a clean rag. Engine oil
capacity is 1.2 quarts or 1.1 liters.
Check the oil level by inserting the dipstick in the filler hole without screwing it in. If the oil level is below
the end of the dipstick, refill with recommended oil up to the top of the oil filler neck.
Lower limit
Upper limit
Oil drain bolt
Dipstick
-5-

Other manuals for Kipor Sinemaster IG6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor Sinemaster IG6000 and is the answer not in the manual?

Kipor Sinemaster IG6000 Specifications

General IconGeneral
BrandKipor
ModelSinemaster IG6000
CategoryPortable Generator
LanguageEnglish

Related product manuals