KIRLOSKAR CPHM - Page 14

4.
4
(a)
SPECIFICATIO
NS
OF
STUFFIN
G
BOX
PACKING
GASKET
AND
“O”
RING
FOR
DRIVING
U
NITS
5,7,9
IOM/CPHM/
DEC19
/0
1
Page: Page 13 of 48
Issue Date:
14/12
/2019
Revision No.:1
.
PART NO. DESCRIPTION
UNIT NO.
CPHM 11, 11A, 11B CPHM 13
125/45 150/43 125/26
150/52
150/50M 200/46 200/38M
GLAND PACKING ARRGT. WITH
LANTERN RING
2 + L + 3 2 + L + 3
4300001 GLAND PACKING SIZE
(O.D. x I.D. x THICK)
75 x 55 x 10 105 x 80 x 12
STRAIGHT LENGTH OF GLAND
PACKING IN mm.
205 295
5110001 GASKET FOR CASING & CASING
COVER
266 ID x 282 OD
x 1 TH
454 ID x 474 OD
x
1 TH
471 ID x
491 OD x
1 TH
402 ID x 425
OD x 2 TH
460 ID x 490
OD x 2 TH
685 ID x 710
OD x 1 TH
520 ID x 540
OD x 2 TH
5140001 GASKET FOR BEARING COVER
146 x 156 x 1T 140 x 185 x 1 T
5150001 GASKET FOR IMPELLER AND SHAFT
SLEEVE
50 OD x 44 ID x 1 TH 74 OD x 69 ID x 1 TH
5160001 GASKET FOR MECH. SEAL
76 ID x 94 OD x 1 T 83 ID x 94 OD x 1 T
5250101 “O” RING FOR CASING COVER
145 ID x 3 TH 175 ID x 3 TH
5231101 “O” RING FOR BEARING HOUSING
150 ID x 3 T 207 ID x 3 T
5250201 ‘O’ RING FOR LANTERN BRACKET
265 ID x 3 TH 308 ID x 3 TH
5230301 ‘O’ RING FOR BEARING CARTRIDGE
--------------- -------------
6820001 GASKET FOR IMPELLER AND
IMPELLER NUT
48 OD x 38 ID x 1 TH 69 OD x 56 ID x 1 TH
6850001 GASKET FOR OIL WELL COVER
99 OD x 55 ID x 1 TH 99 OD x 55 ID x 1 TH
NOTE: CORRECT LIQUID SPECIFICATIONS SHOULD BE INFORMED TO US TO RECOMMEND SUITABLE GRADE OF ST. BOX PACKING.
ALL DIMENSIONS ARE IN MM.
.