• Press and hold button B for 3 seconds to enter setting
mode.
*Note after 9 seconds of inactivity setting mode will deactivate
• The hour LEDs will flash when you are in hour setting
mode.
• Press button A to increase the hour as required.
• Hold button A to increase the hours more quickly.
• Press button B to confirm and move to the minutes.
This watch has 3 user selectable animations:
Animation 1: When this animation is chosen
the display will pulse continuously.
In setting mode, animation 1 is indicated by
a light at the 12 o’clock position.
2. How to set the time and animation
I. Setting the hour
III. Setting the animation
• The minute LEDs will flash when you are in minute
setting mode.
• Press button A to increase the minutes as required.
• Hold button A to increase the minutes more quickly.
• Press button B to confirm and move to animation
setting mode.
II. Setting the minutes
To Next Page
