1
2
3
4
5
6
• To adjust the strap to fit your wrist you will need a watch
hammer, a watch strap block and a pair of scissors.
*If unsure, you should ask a watch shop or jewelers for assistance.
• Each side doesn’t necessarily have to be the same length.
• At this stage, it is just an estimated length so keep the
strap a little loose as it will be checked more precisely in
the following steps.
(you are advised to allow one extra hole on each side of
the strap, so for example on the picture above, if the hole 7
seems to be a perfect fit, select hole 6 for now.)
4. How to adjust the strap
I. Estimating strap length
• Put the watch on
your wrist and pinch
the two sides of the
strap together to
estimate the desired
length of each side
of the strap.
• Look at the pin
holes on the side
of the strap and
remember which point is the best position on each side.
To Next Page
