Kit-Lock KL1000 - Advanced Programming; Public Use Modes; Set Technician Code

Step 1 – Enter 4 digit code•Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code••the lock will now open and remain open until next 4 digit code is entered.
SET B﴿ PUBLIC USE – DOUBLE CODE ENTRY
#Master Code• 22••
Example:#11335577•22••
Result: The lock will now remain open until the next user enters their own personal code into the lock as follows:
Step 1 – Enter 4 digit code•Repeat 4 digit code••
Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code••the lock will now open and remain open until next 4 digit code is entered as Step 1.
Note: When locked in this mode•LED will flash every 5 seconds to indicate the locker is locked.
SET TECHNICIAN CODE
#Master Code•99•Technician Code• Technician Code••
Example:#11335577•99•555555•555555••
Result: The lock is automatically set into B﴿ Public Use Function and allows the programmed Technician Code to open the lock WITHOUT the entered single User
Code being erased.
Note: If lock is opened with a Master Code the User Code will be erased.
POI‐KL1000‐v5:1017
© 2018 Codelocks Ltd. All rights reserved.
Keywords: Lock Locks Kit Kitlock Kitlocker Locker Program Programming Instruction Instruct Help Support Troubleshoot Troubleshooting Sequence
Sequences Install Installation Parameters Settings Setting KL KL1000 1000 2017