The base should be cleaned after every few uses to maintain
cleanliness and empty the vacuum drip tank.
To clean the base:
1. Open the top cover to a 90-degree position with the base.
2. Hold the base open with your thumbs and push open the top cover
latch with your index fingers, as depicted in the image below.
3.After removing the base, it can be rinsed withwater.
Notice!
Do not rinse the top cover with water or immerse it
in water to prevent liquid from getting into the
machine. Doing so could cause the circuit board to
short out and other dangers.
-8-
Cleaning the base
Kitchen HQ Vacuum Sealer User Manual
To Next Page