KitchenAid 5 CUP FOOD PROCESSOR - Page 11

9
Model KFP350 only
–To use Mini Bowl, position Mini
Bowl on power base shaft. Fit
center opening of mini blade over
top of attachment stem. Use
caution; blades are sharp. Turn
stem counterclockwise to lock into
place. Place assembled mini blade
on the power base shaft. It may
be necessary to rotate bowl and
blade slightly so that it is properly
aligned and falls into place.
6. Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl
handle. Grasp the feed tube and
turn the cover to the right until it
locks into place.
Note: Your KitchenAid Food
Processor features a double
interlock safety system to insure
that the unit will not operate
unless the work bowl and the
work bowl cover are properly
aligned with the power base.
Note: Never attach the cover to
the work bowl before the work
bowl has been positioned on the
power base. Damage to the work
bowl may result.
7. Fit the pusher into the feed tube
and plug the unit into an electrical
outlet.
Note: Never try to remove the
work bowl before unlocking the
work bowl cover (turning the work
bowl cover to the left). Damage
to the work bowl may result.
Assembling Your Food Processor
P
ulse
O
n
O
ff
C
A
U
T
IO
N
: R
E
A
D
IN
S
T
R
U
C
T
IO
N
S
B
E
F
O
R
E
U
S
IN
G