ENGLISH
USING THE GLASS BOWL | 9
USING THE GLASS BOWL
ATTACHING THE GLASS BOWL TO THE STAND MIXER
ATTACHING THE THREAD RING TO THE GLASS BOWL
Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When
using the glass bowl, it may be necessary to readjust the beater-to-bowl clearance.
Ensure the thread ring is tight enough to avoid beater-to-bowl hits. When correctly
positioned, the handle and pour spout should not touch the pedestal of the mixer.
Please refer to the Stand Mixer Instructions Manual for complete instructions on
adjusting the beater-to-bowl clearance.
NOTE: This glass bowl is designed to fit several different tilt-head Stand Mixers. It
uses a specially designed polymer thread ring between the glass and the metal bowl
clamping plate on the mixer to ensure a proper fit. Follow these instructions to attach
the glass bowl to your Stand Mixer.
1
Turn the glass bowl over.
2
Screw the plastic thread ring
clockwise onto the bottom threads
of the glass bowl until it is firmly
attached.
W11175458A_01_EN_v04.indd 9 10/27/17 11:31 AM
To Next Page
Loading...
