6
Turn the Stand Mixer OFF(0) and unplug.
1
For Stand Mixers with a hinged
attachment hub cover: Flip up to open.
For Stand Mixers with a removable
attachment hub cover: Turn the
attachment knob counterclockwise to
remove attachment hub cover.
2
PRODUCT USAGE
ATTACHING THE SIFTER HOUSING TO THE STAND MIXER
Before using your Sifter+Scale for the first time, wipe the Ingredient Hopper, Sifter As-
sembly, and Swivel Chute with a warm damp cloth, then wipe clean with a damp cloth.
Do not wash the Sifter Housing or Digital Scale. Dry with a soft cloth. See the “Care and
cleaning” section for complete instructions.
Insert the attachment Shaft Housing
into the attachment hub, making certain
the power shaft fits into the square
hub socket. If necessary, rotate the
attachment back and forth. The pin on
the attachment housing will fit into the
notch of the hub rim when in the proper
position.
3
Tighten the Stand Mixer attachment hub
knob clockwise until the attachment is
completely secured to the Stand Mixer.
4
W11494233A_01_EN.indd 6W11494233A_01_EN.indd 6 1/6/2021 1:59:58 PM1/6/2021 1:59:58 PM
To Next Page
Loading...
