TROUBLESHOOTING
If the brew timer display is not
illuminated:
Check to see whether the coffee maker
is plugged into a grounded 3-prong
outlet. If it is, check the fuse or circuit
breaker on the electrical circuit the
coffee maker is connected to and make
sure the circuit is closed.
If only a portion of the water added to
the coffee maker actually brews:
The coffee maker requires immediate
descaling. Please refer to "Descaling the
Coffee Maker" in the "Coffee Maker
Care" section.
If "Erl" appears on the brew button
timer display:
A button may be jammed. Unplug the
coffee maker and press each button
several times.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Plug the coffee maker into a grounded
3-prong outlet.
If "Erl" appears again on the display,
repeat this procedure.
If the problem cannot be corrected:
See the KitchenAid warranty section.
Do not return the coffee maker to the
retailer; retailers do not provide service.
14
To Next Page
Loading...
Need help?
General
