Using the Self-Cleaning Cycle
To delay cleaning start time:
1. Press CLEAN. PRESS
A 31/2-hour Self-Cleaning cycle will be
set. (The first 3 hours are for cleaning,
the last 30 minutes are for cooling.)
YOU SEE
(stop time display shows time
31/=hours later than time of day -
shown in start time display)
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle
other than 31/2hours, press the
desired Number pads for the new
time up to 41/2hours.
• Use 21/2hours for light soil.
• Use 31/2to 41,_hours for moderate
to heavy soil.
PRESS YOU SEE
(example shows 4-hour
cleaning cycle with stop time
now 4 hours later than time
of day)
3. Press STOP TIME.
PRESS YOU SEE
4, Set stop time.
Examplefor7:00:
PRESS YOU SEE
(display shows stop time of 7:00
and start time of 3:00 - stop time
minus cleaning time)
5. Complete entry.
NOTE: The door will lock right after you
press START.
PRESS YOU SEE
When the start time is reached:
YOU SEE
54
To Next Page
Loading...
