EasyManua.ls Logo

KitchenAid KERC507 - Anti-Tip Bracket Verification

KitchenAid KERC507
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting to Know Your Range
The anti-tipbracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
Tip Over Hazard
Connect anti=tip bracket to the range.
,_.__ Reconnect anti-tip bracket, if the range is moved.
Do not push down on the open oven door.
Follow the Installation Instructions.
Do not let children climb onto the oven door.
Failure to follow these instructions can result in death, burns,
or other injury.
To verifytheanti-tipbracket is
engaged:
Rear
leveling
foot
Remove the storage drawer. (See page 7.)
Look to see if the anti-tip bracket is attached
to floor with screws.
Make sure left rear leveling foot is positioned
under the anti-tip bracket.
See Installation Instructions for further details.

Other manuals for KitchenAid KERC507

Related product manuals