"rigand
Cooktop
Caring
forYour
This section tells you how to operate the controls to the cooktop. It also discusses
how the ceramic glass cooktop works, and includes tips on how to cook with and
maintain the cooktop.
Usingthe surface cooking areas
Control knobs
Push in control knobs before turning them
to a setting. Set them anywhere between HI
and OFF.
Surface cooking area markers
The solid dot in the surface cooking area
marker shows which surface
cooking area is turned on by
that knob.
Power on lights
When you use a control knob to turn on a
surface cooking area, the
Power On Light by that knob
FRONT willglow.
("CHAUD" is
French for
"HOT")
Hot surface indicator lights
The Hot Surface Indicator Lights on the
cooktop surface will glow
when any of the surface
cooking areas are hot. The
Indicator Lights will continue
to glow as long as the surface
cooking areas are too hot to
touch, even after they are
turned off.
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
Control seffing guide
For best results, start cooking at the high
setting; then turn the control knob down to
continue cooking.
SETTING RECOMMENDED USE
HI oTo start foods cooking.
oTo bring liquids to a boil.
MED HI eTo hold a rapid boil.
eTo fry chicken or
pancakes.
MED o For gravy, pudding, and
icing.
oTo cook large amounts
of vegetables.
MED LO eTo keep food cooking
after starting it on a
higher setting.
LO oTo keep food warm until
ready to serve.
11
To Next Page
Loading...
