_._singand Caring forYour Oven
3. Press desired Number pad.
Use the "Convect full meal chart" later in
this section as your guide for selecting
a cycle.
NOTES:
o You can change the Convect Full Meal
cycle any time before pressing START
by repeating Step 3.
o You can program your own cycle,
which you can then select in the future
by pressing just CONVECT FULL MEAL
and START. (See "To program your
own cycle" later in this section for more
information.)
PRESS YOU SEE
(example for cycle i)
4. Start oven. PRESS
(or 177°0)
YOU SEE
5. When the Convect Full Meal
cycle is done:
Four tones will sound, followed by four
reminder tones every minute until you
open the door (unless the audible signals
have not been disabled), remove the
probe, or press CANCEL/OFF.
YOU SEE
40
To Next Page
Loading...
