- ii -
WHIRLPOOL CORPORATION assumes no responsibility for any repairs made
on our products by anyone other than Authorized Service Technicians.
FORWARD
This KitchenAid Job Aid, “Self-Cleaning Slide-In/Freestanding Gas Ranges,” (Part #4317367),
provides the technician with information on the installation, operation, and service of Self-Cleaning
Slide-In/Freestanding Gas Ranges. It is to be used as a training Job Aid and Service Manual. For
specific information on the model being serviced, refer to the “Use and Care Guide,” or “Wiring
Diagram” provided with the gas range.
The Wiring Diagrams and Strip Circuits used in this Job Aid are typical and should be used for
training purposes only. Always use the Wiring Diagram supplied with the product when servicing
the unit.
GOALS AND OBJECTIVES
The goal of this Job Aid is to provide detailed information that will enable the service technician to
properly diagnose malfunctions and repair KitchenAid Self-Cleaning Slide-In/Freestanding Gas
Ranges.
The objectives of this Job Aid are to:
• Understand and follow proper safety precautions.
• Successfully troubleshoot and diagnose malfunctions.
• Successfully perform necessary repairs.
• Successfully return the range to its proper operational status.
Copyright © 2004, Whirlpool Corporation, Benton Harbor, MI 49022
To Next Page
Loading...
