6
arb
If You Need Service or Assistance
PLEASE READ THE FOLLOWING
BEFORE CALLING YOUR
SERVICE CENTER.
1.The mixer may warm up during use.
Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the unit. This is normal.
2.The mixer may emit a pungent odor,
especially when new. This is common
with electric motors.
3.If the flat beater hits the bowl, stop the
mixer. See “Beater to Bowl
Clearance,” page 12.
KEEP A COPY OF THE SALES
RECEIPT SHOWING THE DATE OF
PURCHASE. PROOF OF PURCHASE
WILL ASSURE YOU OF IN-
WARRANTY SERVICE.
If your mixer should malfunction
or fail to operate, please check the
following:
- Is the mixer plugged in?
- Is the fuse in the circuit to the mixer
in working order? If you have a circuit
breaker box, be sure the circuit is
closed.
- If the problem is not due to one of the
above items, see “How to Arrange for
Service” on page 5.
- DO NOT return the mixer to the
retailer as they do not provide service.
Electrical Requirements
Volts: 120 A.C. only. Hertz: 60
The wattage rating for your mixer is
printed on the serial plate.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman
install an outlet near the appliance.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire or electrical shock.
WARNING
ý
!
To Next Page
Loading...
Need help?
General
