KitchenAid KPEXTA - To Assemble Pasta Press Accessory

3
ENGLISH
1. Place the press upside down on a
counter or table, and insert the end
of the auger with the cross-shaped
peg (C) into the press housing (A),
aligning the cross-shaped peg with the
matching indentation inside. When
correctly positioned, the top of the
auger will be flush with the opening.
To Assemble Pasta Press Accessory
2. Place one of the pasta plates (F, G, H,
I, J or K) over the opening, aligning its
center with the auger, matching the
tabs of the plate with the notches in
the press housing.
SMALL MACARONI
LARGE
MACARONI
FUSILLI
SPAGHETTI
BUCATINI
RIGATONI
A - Housing
B - Cutter
C - Auger
D - Pasta Ring
E - Storage Case
F - Spaghetti Plate
G - Bucatini Plate
H - Rigatoni Plate
I - Fusilli Plate
J - Large Macaroni Plate
K - Small Macaroni Plate
L - Combo Tool
M - Cleaning Brush
C
D
E
F
G
H
I
L
J
K
A
B
RIGATONI
M