Contents [ hide
1 PARTS AND FEATURES
2 PRODUCT SAFETY
3 ELECTRICAL REQUIREMENTS
4 MOTOR HORSEPOWER
5 GET STARTED
6 BLENDER FUNCTION GUIDE
7 USING THE BLENDER
8 CARE AND CLEANING
9 TROUBLESHOOTING GUIDE
10 WARRANTY AND SERVICE
11 File Downloads
12 References
13 Related Manuals
PARTS AND FEATURES
1. Ingredient-measuring cap 8 Start/Stop toggle switch
2 Lid 9 Pulse toggle switch
3 Blender jar 10 Control dial
4 Blade 11 Removable blender jar pad
5 Power cord (not shown) 12 Jar handle
6 Base 13 Tamper
7 Status indicator light
PRODUCT SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER?” or “WARNING.” These words mean:
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock do not put Stand Blender base in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any
appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and
pull from the outlet. Never pull from the power cord.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest Authorized Service Facility for examination, repair, or electrical or mechanical adjustment.
7. Do not use outdoors.
To Next Page
Loading...
