To blend, put the items into the blender jar. Secure the Lid with the ingredient measuring cap.
Plug the Blender into a grounded 3-prong outlet. Next, place the blender jar on the base, making sure that it is
fully aligned on the jar pad.
NOTE: Do not fill blender jar past the topmost measurement mark, especially when blending liquids.
Flip the power switch to ON (I). The status indicator light will flash, indicating that the Blender is in Standby
mode and ready to operate.
Flip the START/STOP toggle switch up or down to start.The status indicator light will now be solid. Turn the
control dial to your desired speed. See the “Blender function guide” for more details.
Using the Tamper: Remove the ingredient measuring cap only. Stir or press contents down towards the blade. When finished, replace the ingredient-measuring cap before
resuming blending.
The Pulse function may also be used on its own as a separate blending function while the Blender is in Standby
To Next Page
