ENGLISH
7
PRODUCT ASSEMBLY
ATTACHING/REMOVING THE BOWL
Turn the Stand Mixer “OFF/0” and then
unplug.
1
Unlock and lift the Motor Head. Then,
lock* the head to keep it lifted.
2
Place the 4.8 L Bowl on the Clamping
Plate and twist to lock in place.
3
Slide and rotate the accessory aligning
over the pin on the shaft.
4
Unlock the Motor Head and move it
down. Then, lock* the head to keep
it down. Before mixing, test lock by
attempting to raise the Motor Head.
5
*Locking option is available on selected models.
To Next Page
Loading...
