Tilt-Head Stand Mixer
3
Place the Precise Heat Mixing Bowl on
the clamping plate, and attach by turning
gently in a clockwise direction.
4
If desired, attach the appropriate
accessory for your recipe.
5
Place the Stand Mixer motor head back
in the down position and lock into place.
2
Tilt the Stand Mixer motor head back.
1
Be sure the Stand Mixer’s speed control
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
Use the attachment ring to the bowl clamping plate to attach the Precise Heat Mixing Bowl
to the Stand Mixer.
W10719715A_EN-Final.indd 9 11/18/14 1:21 PM
To Next Page
Loading...
