EasyManua.ls Logo

KitchenAid KUDL15FXSS7 - Installation Requirements; Tools and Parts

KitchenAid KUDL15FXSS7
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Toolsneeded:
Piers Flat-blade
I screwdriver _
%6" and Y4" _ I UL Listed/CSA
nut drivers or _ IApproved twist-on _
hex sockets _ I wire connectors *
10" adjustable wrench_1%, omen-end
that opens to I wr^n'Zh _"
11/8 (2.9 cm) _
Torx ®*T20® and, if installing custom
front panels, Torx®T15 ®screwdrivers
*Must be the proper size to connect your household wiring to
16-gauge wiring in dishwasher.
Other useful items you may need:
FI!!!_¸: i ¸/P
Parts supplied:
° 1 "
Dram hose Dralnhose #10x I/2 Underc0unter
Clamps (2)_ Ph Ilips: mounting
(1 large and _ head brackets(2)
3ustom
:ape (2)
Parts needed:
%" Compr X ¾" h_
For part or kit, see local
retailer or cal! Whirlpool
Parts: 1-800,442-9991. Part
Number W10273460
(4) #10 x 1/2"wood screws (if installing custom front panels)
I"®TORX, T15, and T20 are registered trademarks of Saturn Fasteners, Inc.
REQUIREMENTS
Supplied in Kit:
(4) Plastic studs (attached to each other by runners)
(4) Short screws (10-16 hex-head screw)
(4) Long screws (8-18 Torx®head screws)
(1)Template (located inside Use and Care Guide bag assembly)
(1) Instruction sheet (located inside Use and Care Guide bag
assembly)
NOTE: The screws supplied are used for only 3/4"thick wooden
panel. If the wooden panel is less than 3/4"thick, customer must
purchase screws locally.
Other parts you may also need:
I 1' " 2" Masking or' Moisture
(3.81_5 cm)duct tape barrier tape f_
I Sc[ew _type I (Part Number J_/
I 4396277)
NOTES:
Moisture barrier tape is recommended when installing a
dishwasher under a wood countertop.
Parts available for purchase in plumbing supply stores. Check
local codes. Check existing electrical supply. See "Electrical
Requirements" section. It is recommended that electrical
connections be made by a licensed electrical installer.
In addition, for first-time installations
Toolsneeded:
I 7iL
IandIV "hole
Parts needed:
Requirements" section:
O.D.suggested) or I ........ ' _ _ _ ,
flexib e b adedlr i t-or uJrec_,vvJre', for r_ower bupply
_LeL_'stV_ Cord: use UL
d histed!CSA
strain relief Approved power
tofit%, (2,2cm) suPplycerd kit
hole marked for use With
dishwasher
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230.

Related product manuals