KitchenAid KUIA18PNL - Page 65

6-7
Idle Mode: Time in this mode is dependent on the temperature at the bin thermistor.
Service/Clean Mode
begins (See page 6-11)
If "Clean"
is selected
If the bin thermistor is
not sensed by the
control
NOTE: “Bin Full” setpoint is 38°F. The unit will stay in the “Idle Mode” as long as the
ice in the bin touches the bin thermistor and keeps it lower than 38°F.
Failure Mode begins
(See page 6-10)
Freeze Mode begins
(See page 6-8)
Idle Mode
(Idle Mode continues
as long as bin is full)
When the bin is
not full