KitchenAid Professional 5 Plus Series - Product Disassembly; Removing Components

ENGLISH
11
PRODUCT DISASSEMBLY
2
4
6
8
10
RESET
OFF/0
STIR
Turn the Stand Mixer to “OFF/ 0” and
then unplug.
1
2
Remove Pouring shield: Lift the front of
the pouring shield* clear of the rim of the
bowl. Pull away from the Stand Mixer.
Remove the accessory: Press accessory
upward and turn to the left. Pull down the
accessory from beater shaft.
3
To Remove Bowl: Place bowl-lift lever in
the down position. Grasp bowl handle
and lift straight up and off locating pins
4