KITE Nebula - Assembly and Components; Step-by-Step Assembly Instructions

Assembly instructions
1. Insert the side support frame in to
the feet (Fig 1a) by pressing in the
push pins and fully inserting until the
push pins have come through the
holes. Fig 1b.
NOTE. Ensure the xing belt clips
are on the same side as the spring
loaded feet.
2. Connect the crossbar to the
feet (Fig 2a), align the bracket and
secure in place using the bolts and
tighten with the provided Allen key.
Fig 2b. Your frame should now like
Fig 2c.
3. With the drop side of the crib
facing the same way as the spring
loaded feet, slot the top frame
into the top of the side supports
(Fig3a) and push downwards fully
until the clips are seated correctly.
Figs 3b + 3c.
4. Wrap the material around the
side support frame and secure in
place with Velcro. Fig4.
Fig 1
Fig 2
Parts list
1. Frame with foot board + mattress.
2. Crossbar.
3. Feet x2.
4. Side support frames x2.
5. Bassinette crib liner.
6. Crib liner support bar.
7. Bolts x2 and Allen key.
8. Bed xing belts.
9. Carry bag - not shown.
2
3 34 4
5
6
1
Push
Pin
Clip
B
C
B
A
A
C
Fig 3
Fig 4
B
Velcro
Bolt
8 7
Fixing belt clips
A
NOTE Ensure all zips have
been connected to their
corresponsding clips or
press studs.