Co Sleeper Mode
10. Unzip the front panel on both
sides. Fig 10a. Slide the buttons
sideways and lift the bar upwards
on both sides. Fig 10b. Roll the bar
and panel up and secure with the
elastic loops. Fig 10c.
11. Attach the xing belts to the side
supports. Fig 11.
12. Ensure the feet are extended
as far as possible to the adults
bed. Fig 12.
CAUTION
Always apply the brakes when the
product has been positioned in its
place of intended use.
Press down to lock wheels in place.
Lift up to release brakes.
Fig 7
Fig 12
Fig 10
A
B
C
1 Slide
2 Lift
Elastic loops
Zip
Fig 11
Fixing belts
Fully extended
To Next Page
Loading...