KITE Nebula - Co Sleeper Mode: Secure Bed Attachment; Correct Frame and Mattress Alignment; Crucial Role of Anchor Plates

WARNING!
Before every use always check to make sure there is no space between the parents
mattress and the side of the co sleeper.
If any space is found, pull the belts rmly to tighten until there is no space left and the
correct position has been restored.
Only suitable for beds with straight sides.
Not suitable for beds with round mattresses or water beds.
When the product is used in the bedside sleeping mode, it should always be tted to the
long side of the bed.
Do not x the co sleeper to the head or bottom of the bed.
Protruding
frame
Mattress and frame aligned
INCORRECT
Bed frame and mattress not in line
CORRECT
Bed frame and mattress in line
Never use the Nebula Crib in co sleeping mode without the anchor plate.
Ensure the plates are securely attached to the adult bed.
Anchor plates