8 9
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a wireless device’ section
2. Use the controls on your device to select content
3. Audio played through the connected wireless device will now be heard through the speaker
4. To play or pause the selected track, use the controls on your device or press the MFB (1)
5. To skip to the next track, use the controls on your device or press the MFB (1) twice.
Previous track can only be controlled using your device
6. The volume can be adjusted on your device only
Note: Track control functions from the MFB (1) on the BoomBar+ will require your device to
have Bluetooth prole AVRCP. Please check your device’s manual if unsure.
Using the aux-in
1. With the BoomBar+ turned on, insert the 3.5 mm aux cable into the Aux input (3)
on the BoomBar+
2. The LED indicator (2) will turn solid green and any active wireless connection will disconnect
3. Plug the other end of the aux cable into the audio/headphone output on an MP3 player or
other audio source
4. Audio played through the connected device will now be heard through the speaker
5. The volume can be adjusted on your device only
Note: The MFB (1) does not operate in Aux input mode.
To Next Page
Loading...
