98
Battery protection mode
• If you haven’t used the speaker for 90 days, the speaker will
switch to battery protection mode automatically. To cancel the
battery protection mode, connect the Hive2o to power, see
point 1 of Charging the battery
• To keep the rechargeable battery in good condition, please
discharge and recharge speaker every 3 months, even if you
use it or not
Note: For best sound quality when the battery is below 30%,
it is best to charge the Hive2o.
Pairing the Hive2o to your device
1. Long press MFB (1) to turn the speaker on and it will
automatically enter pairing mode and the LED Indicator (5)
with ash white
2. Turn your iOS, Android, or Windows device’s Bluetooth ON
and search for new devices
3. Select ‘KS Hive2o’. If asked for a passcode, enter ‘0000’,
and the device will pair
4. Once connected an audio tone will sound and the LED
Indicator (5) will turn solid white
Re-pairing or pairing new devices
1. Turn Bluetooth connectivity o on any previously paired devices
OR
2. Long press the MFB (1) to re-enter pairing mode
3. Follow the ‘Pairing the Hive2o to your device’ instructions
Note: If a previously paired device is not present within the
Bluetooth connectivity range then the speaker will re-enter
pairing mode.
To Next Page
Loading...
