EasyManua.ls Logo

Kitvision escape - Care for Your Escape UHD Action Camera; Troubleshooting

Kitvision escape
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 31
Care for your Escape UHD Action Camera
Please DON’T:
Get the camera wet, unless sealed in the included waterproof case
Drop the camera as this will invalidate your warranty
Open up the camera. There are no user serviceable parts inside
Expose the camera to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
Clean the camera with a soft dry cloth and no detergents
Clean the camera case after it has been in water (salt especially) with fresh tap water
Use a soft dry cloth to wipe the surface then leave in a cool, ventilated place to dry
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems
with anything, please feel free to contactusat:support@kitvision.co.uk
or visit www.kitvision.co.uk
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded,
non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product
improvement and development.

Related product manuals