Kitvision escape - Functions; Instructions for Use

6 7
4 15
14
10 13
11
12
3
9 7 86
1 52
Functions
1. Shutter/Ok Button
2. Top Operation Indicator
3. Power/Mode Button
4. Built-in Microphone
5. Micro SD Card slot
6. Micro USB Input
7. L e n s
8. Micro HDMI Output
9. Charging Indicator
10. Built-in LCD
11. Up Button
12. Built-in Speaker
13. Down/Wi-Fi Button
14. Battery Cover
15. Battery Cover Latch
Instructions for use
Turning power on and o
1. Long press the Power/Mode Button (3) to turn on the camera. The Top Operation Indicator (2)
will illuminate red.
2. LongpressthePower/ModeButton(3)toturnpowero.
Charging the battery
The camera has a built-in rechargeable lithium battery. Please fully charge the battery before use.
1. Turnothecamera.
2. Connect the micro USB connector of the USB cable to the camera and the other end to a
PC/mains charger USB port.
3. The Charging Indicator (9) will be solid blue whilst charging.
4. OncefullychargedtheChargingIndicator(9)willturno.
Note: The camera body may be warm after extended use. This is normal.