Kitvision escape - Page 5

8 9
Inserting the memory card
The Escape Action Camera doesn’t have any internal memory. To be able to record video or capture
photos using the camera, you must have your micro SD card inserted. We recommend using a
Class 10 TF memory card between a minimum of 16 GB and a maximum of 32 GB.
1. Ensurethecameraisturnedo.
2. Insert your memory card into the Micro SD Card slot (5).
3. ThecamerausestheFAT32leformat.IfthemicroSDcardisincompatible,itwillneedformatting.
4. To format the card correctly, go to the ‘Changing the Camera Settings’ section later in this manual
and follow the ‘General Settings’ instructions.
Video Mode For recording video clips
Photo Mode For taking still photos
Burst Mode Takes a series of 3 / 5 / 10 photos
Timed Photo Mode Takes a photo after a set time period
Video Playback Viewing recorded videos
Photo Viewer Viewing captured photos
Settings Mode For changing camera settings
Changing the mode of the camera
Thecamerahas8dierentmodes:VideoMode,PhotoMode,BurstMode,TimedPhotoMode,
Time Lapse Mode, Video Playback, Photo Viewer and Settings Mode.