Kitz Y Series User Manual

DocumentNo.:KE-0015-00                                        Sheet:24/37

Ⅳ OperationandMaintenance

1. ForSafeUse



(1) Applyanti-corrosionpaintingtostrainers,incasetheyareusedinacorrosive
environment.Failuretouseanappropriatepaintingmayleadtothecorrosion
ofstrainers,resultinginoperationalmalfunction.

(2) Careshouldbetakeninhandlingpaintedstrainerssothatthepaintingwillnot
comeoff.Theremovalofpaintingmaycausethecorrosionofthestrainers.

(3) Takeappropriateprotectivemeasuresforexcessivecavitypressure,freezing
orwater-hammer,iftheyareexpectedtotakeplace.Failuretoaccommodate
thesemeasuresmaycausedamage tothe productsandleadto operational
malfunction.

1.1 The screen of newly mounted strainers should be disassembled and cleaned up
before the operation of pipeline. It may have collected foreign objects during the
installationofpipeline.

1.2 Retighten the bolts and nuts of the end flanges and cap after the pressure and
temperatureofmountedstrainersareincreased.

1.3 Retightentheboltsandnuts,incaseleakageisfoundintheendflangeorcaparea.
Retighteningshouldbecarriedoutafterdecreasinglinepressureinaccordancewith
the procedure given in Chapter III, Section 6 “Installation Procedure for flanged
strainers”.





Kitz Y Series Specifications

General

Brand	Kitz
Model	Y Series
Category	Control Unit
Language	English