Kitz Y Series User Manual

DocumentNo.:KE-0015-00                                        Sheet:34/37

Ⅶ DisassemblyandReassembly

1. DisassemblyProcedure

1.1 ForSafeDisassembly



(1) Operatorshouldtakeanappropriatecautionfornotbeingexposedtothe
fluidorcatchingfire.




(1) Weartheprotectiveitemssuchasgoggle,glovesandworkingboots.

(2) Takecarenottocatchfingersatwork.

1.2 BeforeDisassembly

(1) Disassemblestrainersinadust-freearea.

(2) Takecarenottodamagethebody,capandscreen.

1.3 Disassembly
 Shutoffvalvesontheupstreamanddownstreamofthestrainerandmakesurethatall
thepressureisrelievedfromthestrainer.AndthenTakeoffthecapandremovethe
screen.Careshouldbetakennottodamagethescreenduringtheoperation.

1.4 Gaskets and screensare consumables.Replace the gasketfor newone. Replace the
screenfornewone,ifitisdamaged.






Kitz Y Series Specifications

General

Brand	Kitz
Model	Y Series
Category	Control Unit
Language	English