Kitz Y Series User Manual

DocumentNo.:KE-0015-00                                        Sheet:35/37

Ⅶ DisassemblyandReassembly 
2. Disassembly

2.1 ForSafeReassembly



(1) Weartheprotectiveitemssuchasgoggle,glovesandworkingboots.

(2) Nofireshouldbeallowedinworkingarea.

(3) Takecarenottocatchfingersinflangesduringassembly.


2.2 BeforeReassembly

(1) Checkallthenecessarypartsbeforereassemblyandreplacethem,iftheyarefound
dissatisfactory.

(2) Make sure to clean reused parts to remove completely oil, dust and other foreign
objects.

(3) Assemblestrainersinadust-freeplace.

(4) Takecarenottodamagethebody,cap,screenandgasket.

(5) Thecapshouldbesecurelytightened.

2.3 Reassembly
 Forthescrewedcapdesign,installthenewgaskettothecap,attachthewashedscreen
tothegrooveofthecapandfastenthecaptothebody.
Fortheboltedcapdesign,insertthewashedscreenfirst,installthenewgaskettothe
capandthenfastenthecaptothebody.


Kitz Y Series Specifications

General

Brand	Kitz
Model	Y Series
Category	Control Unit
Language	English