Klafs 16028 - Operation; Switching the Cabin Light On;Off; Switching Standby On;Off; Starting the Sauna Mode

Sauna
PAGE 8
5070136/05.09
5. Operation
Unit/button: Description:
A Light switch
B 0/I button
C Operation LED
D Rotary knob temperature
5.1. Switching the cabin light On/Off
. Prerequisite: Switch On the main switch of the control system.
Press button A.
5.2. Switching standby On/Off
1. Switch On the main switch at left side of the
housing.
With the main switch activated the control system
is on standby and the control panel can be
operated with the keypad.
Main switch
Prerequisite for the following operations:
The control panel is switched to standby. Permanently lit Operation LED signifies standby
mode.
5.3. Starting the Sauna mode
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1. Press button B.
The Operation LED C flashes. The sauna heater switches On. The sauna is heated and is ready
for bathing after the warm-up period.
After 4 and/or 6 hours, the sauna heater switches off automatically.
Delivery settings: 4 hours.
5.4. Ending the Sauna mode
1. Press button B.
The Operation LED C changes to permanent light. The sauna heater is shut Off. The control
system is in standby mode.
2. To switch Off the control system switch Off main switch on the left side of the control system.
The Operation LED C goes out.