EasyManua.ls Logo

Klarstein 10013323 - Technical Data; Safety Instructions

Klarstein 10013323
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Contents
Technical Data 2
Safety Instructions 2
Product Description ans Accessory 3
Before first Use 4
Use and Operation 4
Cleaning and Care 5
Troubleshooting 5
Hints on Disposal 6
Declaration of Conformity 6
Technical Data
Item number 10013323 10013324 10013325
Power supply 220-240 V ~ 50-60 Hz
Power consumtion 240W 240W 380 W
Dimensions (W x H x D) 33 x 61 x 50,5 cm 40 x 66,5 x 54,5 cm 55 x 82 x 61,5 cm
Safety Instructions
Read all the safety and operating instructions carefully and retain them for future reference.
Position on a flat, stable surface.
A service agent/qualified technician should car out installation and any repairs if required. Do not remove
any components or service panels on this product.
Do not immerse in water, or use steam/jet washers to clean the unit.
Do not cover the appliance when it is operating.
Do not place the appliance near flammable materials and be sure fine ventilation.
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep away the cable from
operating range and do not dunk it into water.
Always carry, store and handle the appliance in a vertical position.
Never tilt the appliance more than 45° from the vertical.
ONLY use drinking or potable water when making ice cubes.
Ensure the water pressure of the connected water supply is between 1 kg/cm² to 8 kg/cm² (14.7-117 psi).
The device is to be used indoors only.
Keep all packaging away from children. Dispose of packaging in accordance to the regulations of local authorities.
If the power cord is damaged, it must be replaced by a recommended qualified technician in order to avoid a hazard.
The separate three-pole socket should be used and it must be grounded.

Related product manuals