How to improve the suction performance of my Klarstein Ventilation Hood?
If the suction performance of your Klarstein Ventilation Hood is not good, it might be because the distance between the unit and the cooking plane is too great. Readjust the distance to be between 65-75cm.
What to do if my Klarstein Ventilation Hood light is on, but the fan isn't working?
If the light is on but the fan of your Klarstein Ventilation Hood isn't working, the fan blade may be jammed. Immediately switch off the unit and have it repaired only by qualified service personnel.
Why is my Klarstein Ventilation Hood vibrating so much?
Excessive vibration in your Klarstein Ventilation Hood can be caused by several factors. The fan blade might be damaged, in this case you should switch off the unit and have it repaired by qualified service personnel only. Also, the unit might not be properly hung on the bracket. To resolve this, take down the unit and check if the bracket is correctly positioned.
Air must not be discharged into a flue used for exhausting fumes from appliances burning gas or other fuels.
Risk of poisoning from exhaust gases. Never operate in extraction mode with an open flue appliance without adequate airflow.
Connect cooker hood via extraction duct with an outlet to the outside.
Ensure negative pressure does not exceed 4 Pa when other energy appliances are in operation.
Provides physical dimensions and details for mounting the cooker hood.
Guides for chimney assembly and installing the activated carbon filter.
Instructions for installing the cooker hood in recirculating mode without an external exhaust.
Controls for turning the motor on/off and adjusting fan speed.
Function to turn the integrated light on or off.
Fan speed display (1-3) and the 5-minute quick timer operation.
Steps for safely replacing incandescent bulbs, including type and wattage limits.
Procedure for replacing halogen and LED lamps with specified wattage limits.
Air must not be discharged into a flue used for exhausting fumes from appliances burning gas or other fuels.
Risk of poisoning from exhaust gases. Never operate in extraction mode with an open flue appliance without adequate airflow.
Connect cooker hood via extraction duct with an outlet to the outside.
Ensure negative pressure does not exceed 4 Pa when other energy appliances are in operation.
Provides physical dimensions and details for mounting the cooker hood.
Guides for chimney assembly and installing the activated carbon filter.
Instructions for installing the cooker hood in recirculating mode without an external exhaust.
Controls for turning the motor on/off and adjusting fan speed.
Function to turn the integrated light on or off.
Fan speed display (1-3) and the 5-minute quick timer operation.
Steps for safely replacing incandescent bulbs, including type and wattage limits.
Procedure for replacing halogen and LED lamps with specified wattage limits.
General| Extraction Type | Ducted / Recirculating |
|---|---|
| Width | 60 cm |
| Number of Speeds | 3 |
| Lighting efficiency class | A |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Lighting Type | LED |
| Material | Stainless Steel |
| Installation Type | Wall-Mounted |
| Filter Type | Aluminum |
To Next Page