Why is my Klarstein Structura 10034849 Ventilation Hood not sucking properly?
Insufficient suction in your Klarstein Ventilation Hood can occur if the distance between the hood and the gas top is too long, so readjust the distance. Also, too much ventilation from open doors or windows can cause this issue. In this case, choose a new place and reassemble the machine.
What to do if the Klarstein Structura 10034849 light is on but the motor doesn't work?
If the light is on but the motor isn't working on your Klarstein Ventilation Hood, here are a few potential causes and solutions: * The leaf might be blocked. Get rid of the blocking. * The capacitor might be damaged. Replace the capacitor. * The motor bearing might be jammed or damaged. Replace the motor. * There might be an internal issue with the motor, such as it being off or emitting a bad smell. Replace the motor.
Why is my Klarstein Structura 10034849 shaking?
Shaking in your Klarstein Ventilation Hood can be due to several reasons: * The leaf might be damaged and causing the shaking. Replace the leaf. * The motor might not be tightly hanged. Lock the motor tightly. * The body might not be tightly hanged. Fix the body tightly.
General| Width | 60 cm |
|---|---|
| Number of Speed Settings | 3 |
| Lighting | 2 x 1.5W LED |
| Material | Stainless steel |
| Filter Type | Aluminum grease filter |
| Type | Wall-mounted |
Covers essential precautions for using the cooker hood, including user age, usage scope, and general maintenance.
Details crucial safety aspects for installation, including qualified personnel and proper air discharge regulations.
Highlights critical warnings regarding extraction mode, potential poisoning, and fire hazards from flying sparks.
Instructions for removing screws and adjusting angle bars for the upper chimney section.
Details on connecting angle bars and reattaching the upper chimney section to the hood.
Steps for positioning the air outlet, attaching the hood to the ceiling, and securing the chimney.
Explains the functions of the buttons on the cooker hood's control panel.
Instructions on how to activate and use the timer function for automatic shut-off.
Guidelines for cleaning exterior surfaces, stainless steel, and the control panel safely.
Procedure for monthly cleaning of the grease filter to maintain efficiency and prevent fire risk.
Step-by-step instructions for safely replacing the lamp in the cooker hood.
Identifies common issues like motor not working, lights out, or shaking, and provides solutions.
Guidance on recycling electrical equipment according to EU regulations to prevent environmental harm.
Provides the name and address of the manufacturer, Chal-Tec GmbH.
To Next Page